5 Quick And Easy Ways To Fix A Running Toilet For Good
Introduction
If your toilet is running, it’s not only annoying, but it’s also wasting water. Depending on how bad the problem is, it might be something as simple as a loose flapper or a worn-out seal. In any case, it’s important to fix a running toilet as soon as possible to avoid further damage and costly repairs.
There are a few quick and easy ways to fix a running toilet, depending on the cause of the problem. If the flapper is loose or damaged, simply replacing it will do the trick. If the problem is with the seal, you may need to replace the entire flush valve assembly. In either case, these are relatively easy repairs that anyone can do with a little time and effort.
Once you’ve fixed the problem, be sure to test the toilet several times to make sure it’s not running anymore. If it is, then you’ll need to troubleshoot the issue to determine what else could be causing it. In most cases, however, a quick repair will do the trick and have your toilet running like new in no time.
Overview of the Problem
Step 1: Check The Water Level in the Tank
If the water level in your tank is too low, your toilet will not flush properly. The first step in fixing a running toilet is to check the water level in the tank. If it is below the fill line, you will need to add more water.
Step 2: Adjust the Toilet Flapper
If your flapper is worn out or damaged, it may be time to replace it. You can buy a replacement flapper at most hardware stores.
To install the new flapper, first remove the old one by disconnecting it from the chain that lifts it. Then, line up the new flapper with the holes in the flush valve and connect it to the lift chain. Be sure that the flapper is properly seated so that it creates a seal when closed.
Step 3: Check The Toilet Flush Valve
Step 4: Replace The Toilet Fill Valve
If your toilet is running constantly, it’s likely that the fill valve needs to be replaced. The fill valve is the mechanism that controls the flow of water into the toilet tank.
To replace the fill valve, first turn off the water supply to the toilet. Then, flush the toilet to empty the tank. Next, remove the tank lid and locate the fill valve.
There are two types of fill valves: ball float and diaphragm. If you have a ball float fill valve, simply unscrew the retaining nut and pull out the old fill valve. If you have a diaphragm fill valve, you’ll need to remove the entire assembly from the tank before you can replace it.
Once the old fill valve is removed, install the new one by screwing it into place or attaching it to the tank according to the manufacturer’s instructions. Finally, turn on the water supply and test-flush the toilet to make sure everything is working properly.
Step 5: Replace Your Toilet’s Flush Handle
If your toilet’s flush handle is loose or broken, it’s time to replace it. Here’s how:
1. Turn off the water to the toilet.
2. Flush the toilet to empty the tank.
3. Remove the old flush handle by unscrewing it from the tank.
4. Install the new flush handle in its place and screw it tight.
5. Turn on the water and test the handle by flushing the toilet several times.
Conclusion
Seek professional plumbing assistance for your running toilet
If you require professional help for your running toilet or if you have a plumbing emergency, please call Normz Plumbing at 01933 384 684 or contact us via email or contact form here.
You can also get in touch with us via Facebook or Instagram.
Normz Plumbing & Heating Services has years of experience installing and repairing plumbing problems for homes and businesses throughout Northamptonshire including:
We also provide complete Bathroom Renovation service.
Recent Post
Is Your Kitchen Tap Making You Sick? The Hidden Dangers of Germs!
Is Your Kitchen Tap Making You Sick? The Hidden Dangers…
How To Find A Water Leak: 9 Ways To Detect Leaking Water Problems Quickly And Easily
How To Find A Water Leak: 9 Ways To Detect…
What Clients Think About Us?
We guarantee your satisfaction with any plumbing service we provide. If you’re not happy, we’ll return to you and fix it exactly to your satisfaction.